Interpreting biomonitoring data: Introducing the international human biomonitoring (i-HBM) working group's health-based guidance value (HB2GV) dashboard.

Human biomonitoring (HBM) data measured in specific contexts or populations provide information for comparing population exposures. There are numerous health-based biomonitoring guidance values, but to locate these values, interested parties need to seek them out individually from publications, governmental reports, websites and other sources. Until now, there has been no central, international repository for this information. Thus, a tool is needed to help researchers, public health professionals, risk assessors, and regulatory decision makers to quickly locate relevant values on numerous environmental chemicals. A free, on-line repository for international health-based guidance values to facilitate the interpretation of HBM data is now available. The repository is referred to as the "Human Biomonitoring Health-Based Guidance Value (HB2GV) Dashboard". The Dashboard represents the efforts of the International Human Biomonitoring Working Group (i-HBM), affiliated with the International Society of Exposure Science. The i-HBM's mission is to promote the use of population-level HBM data to inform public health decision-making by developing harmonized resources to facilitate the interpretation of HBM data in a health-based context. This paper describes the methods used to compile the human biomonitoring health-based guidance values, how the values can be accessed and used, and caveats with using the Dashboard for interpreting HBM data. To our knowledge, the HB2GV Dashboard is the first open-access, curated database of HBM guidance values developed for use in interpreting HBM data. This new resource can assist global HBM data users such as risk assessors, risk managers and biomonitoring programs with a readily available compilation of guidance values.

Distribution of perfluoroalkyl acids in fish species from the Baltic Sea and freshwaters in Finland.

Occurrence and distribution of perfluoroalkyl acids (PFAAs), a sub-category of per- and polyfluoroalkyl substances (PFASs), is widespread in the environment. Food, especially fish meat, is a major pathway via which humans are exposed to PFAAs. As fish is an integral part of Nordic diet, therefore, in this study, several fish species, caught in selected Baltic Sea basins and freshwater bodies of Finland, were analysed for PFAAs. Perfluorooctane sulfonate (PFOS) was detected in all Baltic Sea fish samples and in >80% fish samples from freshwaters. PFOS contributed between 46 and 100% to the total PFAA concentration in Baltic Sea fish samples and between 19 and 28% in fish samples from freshwaters. Geographically, concentration ratios of PFOS to other PFAAs differed between fish from the Baltic Sea and Finnish lakes suggesting that distribution of PFAAs differ in these environments. Results were compared with current safety thresholds - environmental quality standard for biota (EQSbiota) set by the European Commission and a group tolerable weekly intake (TWI) for the sum of four PFASs (∑PFAS-4) i.e. perfluorooctanoic acid (PFOA), perfluorononanoic acid (PFNA), perfluorohexane sulfonate (PFHxS) and PFOS, recommended by the European Food Authority (EFSA). EQSbiota compliance was observed for PFOS in all species except smelt caught in the Baltic Sea and also in the River Aurajoki, where smelt had migrated from the Baltic Sea for spawning. Moderate consumption of most Baltic fishes (200 g week-1) results in an exceedance of the new TWI (4.4 ng kg-1 body weight week-1) for ∑PFAS-4.

Concentrations of brominated and phosphorous flame retardants in Finnish house dust and insights into children's exposure.

Brominated and phosphorous flame retardants (BFRs, PFRs) are added to household and consumer products to reduce their flammability. Some FRs are persistent in the environment and may have adverse health effects. As exposure indoors contributes significantly to total exposure, we wanted to estimate the exposure of children (3 years of age) through dust ingestion, inhalation, and dermal absorption. We measured 17 BFRs and 10 PFRs in indoor dust, predicted their respective concentrations in the indoor air and assessed children's exposure. Among the BFRs, decabromodiphenyl ether (BDE-209) had highest median level in the dust (411 ng/g) followed by decabromodiphenyl ethane (DBDPE, 119 ng/g) and bis-ethylhexyl tetrabromophthalate (BEH-TEBP, 106 ng/g). Among the PFRs, trisbutoxyethyl phosphate (TBOEP) had the highest concentration (11100 ng/g) followed by tris(2-chloroisopropyl) phosphate (TCIPP, 1870 ng/g) and triphenyl phosphate (TPHP, 773 ng/g). FR concentration in air predicted from dust concentrations were within the interquartile range of experimental data for 10/13 of BFRs and 4/8 of PFRs compared. Dust ingestion was the major route of exposure (75-99%) for higher molecular weight BFRs, TBOEP and phenyl based PFRs (73-77%). Inhalation was important for volatile BFRs like pentabromobenzene (PBB 71%) and pentabromotoluene (PBT 52%) and dermal exposure for volatile chlorinated PFRs (TCEP 84%, TCIPP 77%). Margins of Exposure (MoE) were calculated as the ratio of total exposure to oral Reference Dose (RfD). MoEs were lowest for TCEP (220), TBOEP (240) and TCIPP (830), and > 1000 for all other FRs. These MoEs imply no risk for Finnish children by the studied FRs.

Interaction of inorganic anions with iron-mineral adsorbents in aqueous media--a review.

A number of inorganic anions (e.g., nitrate, fluoride, bromate, phosphate, and perchlorate) have been reported in alarming concentrations in numerous drinking water sources around the world. Their presence even in very low concentrations may cause serious environmental and health related problems. Due to the presence and significance of iron minerals in the natural aquatic environment and increasing application of iron in water treatment, the knowledge of the structure of iron and iron minerals and their interactions with aquatic pollutants, especially inorganic anions in water are of great importance. Iron minerals have been known since long as potential adsorbents for the removal of inorganic anions from aqueous phase. The chemistry of iron and iron minerals reactions in water is complex. The adsorption ability of iron and iron minerals towards inorganic anions is influenced by several factors such as, surface characteristics of the adsorbent (surface area, density, pore volume, porosity, pore size distribution, pHpzc, purity), pH of the solution, and ionic strength. Furthermore, the physico-chemical properties of inorganic anions (pore size, ionic radius, bulk diffusion coefficient) also significantly influence the adsorption process. The aim of this paper is to provide an overview of the properties of iron and iron minerals and their reactivity with some important inorganic anionic contaminants present in water. It also summarizes the usage of iron and iron minerals in water treatment technology.

Defluoridation from aqueous solutions by nano-alumina: characterization and sorption studies.

The present study was conducted to evaluate the feasibility of nano-alumina (Al(2)O(3)) for fluoride adsorption from aqueous solutions. The nature and morphology of pure and fluoride-sorbed nano-alumina were characterized by SEM with EDX, XRD, and FTIR analysis. Batch adsorption studies were performed as a function of contact time, initial fluoride concentration, temperature, pH and influence of competing anions. Fluoride sorption kinetics was well fitted by pseudo-second-order model. The maximum sorption capacity of nano-alumina for fluoride removal was found to be 14.0 mg g(-1) at 25°C. Maximum fluoride removal occurred at pH 6.15. The fluoride sorption has been well explained using Langmuir isotherm model. Fluoride sorption was mainly influenced by the presence of PO(4)(3-), SO(4)(2-) and CO(3)(2-) ions.

Defluoridation from aqueous solutions by granular ferric hydroxide (GFH).

This research was undertaken to evaluate the feasibility of granular ferric hydroxide (GFH) for fluoride removal from aqueous solutions. Batch experiments were performed to study the influence of various experimental parameters such as contact time (1 min-24h), initial fluoride concentration (1-100 mgL(-1)), temperature (10 and 25 degrees C), pH (3-12) and the presence of competing anions on the adsorption of fluoride on GFH. Kinetic data revealed that the uptake rate of fluoride was rapid in the beginning and 95% adsorption was completed within 10 min and equilibrium was achieved within 60 min. The sorption process was well explained with pseudo-first-order and pore diffusion models. The maximum adsorption capacity of GFH for fluoride removal was 7.0 mgg(-1). The adsorption was found to be an endothermic process and data conform to Langmuir model. The optimum fluoride removal was observed between pH ranges of 4-8. The fluoride adsorption was decreased in the presence of phosphate followed by carbonate and sulphate. Results from this study demonstrated potential utility of GFH that could be developed into a viable technology for fluoride removal from drinking water.